Blog Archives
Plate Washers
By Plate Washers can be round or square, plate washers are used in a variation of applications but are most commonly used with a straight rod anchor bolt, sometimes loose with two nuts or tack welded to the anchor rod. The use of plate washers on an anchor rod can provide a larger surface area which requires more force in […]
Structural F436 Washers
Structural F436 Washers are manufactured to the F436 specification, they are hardened flat washers, that provide a smooth bearing surface used under the head or nut of a bolt. Used with A325 & A490 high strength bolts, A354, A449 & F1554 bolts and anchor rods, etc. Diameters: 3/8″ through 4″ Finish: Plain (black) Hot Dip and Mechanical Galvanized. […]
DTI Washers
DTI Washers are simple washer load cells that are manufactured with raised dimples that are used to indicate when the proper tension level has been achieved during tightening, since tension is what we are after NOT TORQUE. DTI’s are manufactured to the F959 specification. Finshes: Plain (black) & Mechanically Galvanized B695 slsb haydonbolts
Commercial Flat Washers
Commercial Flat Washers provide a smooth bearing surface under the head of a bolt or nut. Manufactured under the F844 specification, they are unhardened and intended for general usage. Finishes: Plain (black) Hot Dip Galvanized & Mechanical Galvanized. Special custom sizes are available upon request. Click on pictures for closer look! Commercial Washer Lock Washer slsb haydonbolts
Tie Rod Assemblies
Tie Rod Assemblies are used in various applications like supporting canopies, as pipe hangers, in cross bracing, etc. Tie rods are an efficient way to add strength or an ascetic touch to any project, while allowing for adding tension and length adjustments. Tie rod assemblies come in several different configurations but will always utilize a right hand […]
Swedge Bolts
Swedge Bolts – a rod with indentations/dimples in its shank and is embedded in concrete, mostly used in highway work or anywhere that may have limited footing space for embeddment. Swedge Bolts by definition are manufactured by “a movement of material” in a press or similar machine to create the indentations, the indentations are not to be cut into the rod. They come […]
Straight Rods/SAG Rods
Straight Rods, SAG Rods or Anchor Rods have many applications from being embedded in concrete to support structural steel columns, highway sign structures, industrial equipment, light poles among many other applications. Rods come in various configurations, IE rods with threads at both ends, rods with a plate washer or nut tack welded on, rods with steel sleeves etc., no matter what […]
Bent Anchor Bolts
Bent Anchor Bolts – J.H. Botts manufactures anchor bolts in house to the F1554 specification. We offer grade 55 S1 and grade 105 steel, the F1554-55 S1 grade is dual certifiable to F1554-36. All of our F1554-55 S1 steel is of the S1 supplement which allows for welding, by carrying only F1554-55 S1 you are […]
Hook & J Bolts
Hook & J Bolts are used in many different applications, including being embedded in concrete. J.H. Botts can manufacture bent rods out of “melted and manufactured in the USA” right here in our plant. Our bent rods are available in the below diameters, grades and finishes. Diameters: Various; Please inquire. Length: Any Length Grades: F1554-Grade 55 S1, F1554-Grade 105, A449, […]
Rise and Run Rods
Rise and Run Rods are custom manufactured rods that generally have thread on both ends and may have one or more bends in a “rise and run” type of configuration. Contact your sales representative for more information. Diameters: 1/2″ through 4″ Grade: Any Finishes: Plain (black) or Galvanized. slsb haydonbolts